Die Cutting

Some presses at Valley use a belt feed system and cutting surface. Parts are die cut against the belt. Die cutting against a belt can increase steel rule tooling life.

350-ton press has a cutting area of 58" x 84" (1473mm x 2134mm).

This press has an automatic in-feed sheet loading system. Feeding large sheets into the press avoids operator strain and reduces material cost since master sheets can be used.

CNC Routing and Sawing

4-head, 3-axis CNC router can be used to process wood, plastic or other materials that are too thick to die cut. Dual 5' (1524mm) tables allow multi-up processing or loading second table while routing.

Panel saw system allows sawing and blanking of sheets as large as 8' x 10' (2438mm x 3048mm).

Compression Molding

200-ton up-acting molding press has 8 adjustable heating zones and a 32" x 62" (813mm x 1575mm) bed size.

600-ton molding press has 66" x 110" (1676mm x 2794mm) bed size.

Vacuum Forming

Three station vacuum forming machine can be used with a variety of materials.

Two-cavity tooling shown above.

Painting & Roll Coating

Valley uses roll coating for paints, coatings and some adhesives. We also have a spray painting operation in-house.

Secondary Operations

Valley Enterprises provides many secondary operations and processes to add value and provide complete products and assemblies for our customers. They include Assembly, Carpet Edge Wrap, Riveting, Adhesives, and Sewing.